Order Products : sales@su-jiao.com
SABIC® PP 651H
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lMFvye_SABIC-PP-651H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PP random co-polymer for Pipe PP 651H is specially designed for transport of hot and cold drinking water. This grade is highly heat stabilized and specially formulated for extraction resistance. Typical Applications PP 651H can be used for hot & cold water pipes & fittings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.897 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/5.0 kg | 0.40 | g/10 min | |
| 230°C/2.16 kg | 0.30 | g/10 min | |
| Molding Shrinkage - Flow | 1.2 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 93 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 13 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 900 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 220 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 135 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 to 240 | °C | |
| Middle Temperature | 200 to 240 | °C | |
| Front Temperature | 200 to 240 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Rate B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® MP-1473UV NAT | Teknor Apex Company | TPE | Monprene® |
| Cheng Yu PP238G3 | Cheng Yu Plastic Company Limited | PP, Unspecified | Cheng Yu |
| DuClear® U 73 A | Ducor Petrochemicals BV | PP Homopolymer | DuClear® |
| Hylex® P1025L2V2 FDA | Entec Polymers | PC | Hylex® |
| OTECH PVC OC5014-Boot | OTECH Corporation | PVC, Unspecified | OTECH PVC |
