Order Products : sales@su-jiao.com

Braskem PP H734-52RNA

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Braskem Europe GmbH
Trademark:	Braskem PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lK9hBK_Braskem-PP-H734-52RNA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Braskem H734-52RNA Polypropylene Resin is a homopolymer developed for thin wall, high speed injection moulding. Braskem H734-52RNA Polypropylene Resin is a high flow homopolymer with a good balance of physical properties. Braskem H734- 52RNA Polypropylene Resin contains a very efficient antistatic package and offers good transparency when required. Braskem H734-52RNA Polypropylene Resin is designed and formulated to allow for very easy processing, short cycle times, low shrinkage, minimal warpage and good part dimensional stability. Applications: Thin wall food packaging Thin wall cosmetic packaging Housewares Appliances Caps & closures Videocassette boxes Office accessories & pens Complies with: U.S. FDA 21 CFR 177.1520(c)1.1 EU, No 10/2011 Consult the regulations for complete details.

Message

Braskem H734-52RNA Polypropylene Resin is a homopolymer developed for thin wall, high speed injection moulding. Braskem H734-52RNA Polypropylene Resin is a high flow homopolymer with a good balance of physical properties. Braskem H734- 52RNA Polypropylene Resin contains a very efficient antistatic package and offers good transparency when required. Braskem H734-52RNA Polypropylene Resin is designed and formulated to allow for very easy processing, short cycle times, low shrinkage, minimal warpage and good part dimensional stability.

Applications:

Thin wall food packaging

Thin wall cosmetic packaging

Housewares

Appliances

Caps & closures

Videocassette boxes

Office accessories & pens

Complies with:

U.S. FDA 21 CFR 177.1520(c)1.1

EU, No 10/2011

Consult the regulations for complete details.

General Information
Agency Ratings	EU No 10/2011 FDA 21 CFR 177.1520(c) 1.1
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	52	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	37.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	9.0	%	ISO 527-2
Flexural Modulus (Injection Molded)	1650	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C, Injection Molded)	2.5	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ¹(0.45 MPa, Unannealed)	105	°C	ISO 75-2/B
Vicat Softening Temperature ²	152	°C	ISO 306/A

Note Message
1 .	Injection Molded
2 .	Injection Molded

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P2880	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
NEXUS BIO BIO-200	Nexus Resin Group, LLC.	Biodeg Polymers	NEXUS BIO
Flontech® FT-905-RSC	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
ENVIROCLEAR® ENV24-NC850	ENVIROPLAS®, Inc.	Copolyester	ENVIROCLEAR®
Hostacom ERC 171N	LyondellBasell Industries	PP Impact Copolymer	Hostacom