Order Products : sales@su-jiao.com
EPIGUM DPE/87 F
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EPIGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lK7IyM_EPIGUM-DPE-87-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPIGUM DPE/87 F is a thermoplastic elastomer. EPIGUM DPE/87 F is a TPV vulcanized rubber workable as thermoplastic compound. Suitable also for food contact. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Moisture | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 87 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 12.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 540 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 25 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 5.10 | MPa | ASTM D412 |
| Tear Strength 2(23°C) | 61.3 | kN/m | ASTM D624 |
| Compression Set (100°C, 22 hr) | 40 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Mass (121°C, 24 hr) | 52 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -57.0 | °C | ASTM D746 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 215 | °C | |
| Die Temperature | 220 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPAZ™ C240GM | Mando Advanced Materials Co., Ltd. | LCP | SEPAZ™ |
| Crastin® LW9030 BK851 | DuPont Performance Polymers | PBT | Crastin® |
| Forprene® 6NM901A80 | SO.F.TER. SPA | TPV | Forprene® |
| EMPOL® BV 307 FR V2 | EMAS Plastik San.Tic.AS. | PS (GPPS) | EMPOL® |
| VALOX™ 553 resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
