Order Products : sales@su-jiao.com
POLYCOMPO PE 3510F
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lGdCxG_POLYCOMPO-PE-3510F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYCOMPO PE 3510F is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Applications of POLYCOMPO PE 3510F include film and packaging. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.933 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 1.6 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 62 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 14.0 | MPa | |
| Break, Injection Molded | 25.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 400 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 115 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 124 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam PX06010 | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Ultramid® B27 SD 05 | BASF Corporation | Nylon 6 | Ultramid® |
| Cri-Line LC-915-THK | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| HYBRANCH HP-100 | DIC Corporation | PS (Specialty) | HYBRANCH |
| Iupilon® FPR4500 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
