Order Products : sales@su-jiao.com
ExxonMobil™ LDPE LD 201.48
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lGcvDW_ExxonMobil-LDPE-LD-201-48.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD 201.48 is a low density polyethylene extrusion coating grade with excellent processability and combination of heat sealability and adhesion. It has: excellent shrinkage/drafting balance, so low-level edge trimming is required, which means that waste can be reduced and processing speed can be increased. -Good water vapor isolation, such as for single-piece packaging purposes (sugar, salt) |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.2 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ TH-418.G001-1390 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| SHIN-A SEV-3410 | SHIN-A T&C | Epoxy | SHIN-A |
| Spartech Polycom PP6312C B6 | Spartech Polycom | PP, Unspecified | Spartech |
| WPP PP M 2097-001 | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| KOPA® KN333G25 | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
