Order Products : sales@su-jiao.com

ESENTTIA 02H82-AC

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lFVaST_ESENTTIA-02H82-AC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: Homopolymer polypropylene with high crystallinity and high stiffness properties, high barrier and ability to maintain their mechanical properties at high temperatures with high cleaning and processability stable batch to batch consistency, excellent thickness control.

Recommended for: Manufacture of biaxial oriented and Cast films of high rigidity, metallized films, raffia ribbons to make big bags, geotextiles, bottles, straws, hoops, ropes, stationery, sheet and thermoformed packaging, extrusion and injection of general purpose items where required these features.

General Information
Features	Barrier Resin Cleanable Food Contact Acceptable General Purpose Good Processability High Rigidity High Stiffness Highly Crystalline Homopolymer
Uses	Bags Bi-axially Oriented Film Bottles Cast Film Drinking Straws General Purpose Packaging Ribbons Rope Sheet Stationary Supplies Textile Applications
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Bi-axially Oriented Film Cast Film Extrusion Injection Molding Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	2.3	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	37.2	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	7.5	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1860	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	37	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
ALCOM® ABS 530/29 SV1217-04MCO	ALBIS PLASTIC GmbH	ABS	ALCOM® ABS
COPYLENE® CH034W	Phillips 66	PP Homopolymer	COPYLENE®
GLS Nylon 6 PN09 IM1	GLS Polymers Pvt. Ltd.	Nylon 6	GLS Nylon 6
HiFill® PFA 4450	Techmer Engineered Solutions	PFA	HiFill®
Sumikon® PM-6830 (Type: Natural)	SBHPP	Phenolic	Sumikon®