Order Products : sales@su-jiao.com
Braskem PE HS5403
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lERwED_Braskem-PE-HS5403.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HS5403 is a high density polyethylene, copolymer, exhibits high die swell, good environmental stress cracking resistance (ESCR), good surface quality and high transparency. Application: Blow Molded Small Volume: Bottles for cleaning products, detergents, chemicals, pharmaceutical products and fabric softener. Process: Blow Molding; Injection Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.954 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.30 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 26 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1 | ASTM D1693 | ||
| 2.00mm, 10% Igepal, molded, F50 | 40.0 | hr | ASTM D1693 |
| 2.00mm, 100% Igepal, molded, F50 | 120 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 30.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1250 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Compression Molded) | 100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 66.0 | °C | ASTM D648 |
| Injection instructions |
|---|
| Recommended Blow Molding Conditions: Feeding Zone: 185°C Barrel: 190°C Die: 195°C Mold Temperature: 5°C to 25°C Parison: 200°C |
| Note Message | |
|---|---|
| 1 . | 0.3mm notched-plaques |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 289 | RTP Company | Nylon 66 | RTP |
| Sylvin 9714-75 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TEREZ PA 6.6 HT 7500 GF 60 H | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| ELASTOSIL® LR 3043/60 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| InnoPlus LD2420K | PTT Global Chemical Public Company Limited | LDPE | InnoPlus |
