Order Products : sales@su-jiao.com

SOLPLAST TC 6000B

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	UTEKSOL d.o.o.
Trademark:	SOLPLAST TC
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lDRbwP_SOLPLAST-TC-6000B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles. Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm. For coloring masters are used on a polyolefine base (PE, EVA). SERIES 6000 Compounds with reduced density mat surface with good-looked effect. Expanded surface look Suitable for betweensoles and thick soles Achieving very fine expanded surfaces

Message

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles.

Resistance to acid, bases and all aqueous solutions is excellent.

Resistance to alcohol and glycols is medium good.

Resistance to aromatic hydrocarbons, fat and of oil is bad.

All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm.

For coloring masters are used on a polyolefine base (PE, EVA).

SERIES 6000

Compounds with reduced density mat surface with good-looked effect.

Expanded surface look

Suitable for betweensoles and thick soles

Achieving very fine expanded surfaces

General Information
Features	Acid Resistant Base Resistant
Uses	Footwear
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.650 to 0.750	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	56 to 65		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	4.50 to 6.50	MPa	ISO 527-2
Tensile Strain (Break)	670 to 690	%	ISO 527-2
Abrasion	300 to 360	mm³

Resin Grade	Manufacturer	Category	Trademark
McCann PP M20THPP12	McCann Plastics Inc.	PP Homopolymer	McCann PP
SMOKEGUARD™ O 404 NATURAL	AlphaGary	Polyolefin, Unspecified	SMOKEGUARD™ O
NORYL™ PX1543F resin	SABIC Innovative Plastics	PPE+PS	NORYL™
Chemlon® 125-15 MGH	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
REV Materials 8001-003	REV Materials	PP, Unspecified	REV Materials