Order Products : sales@su-jiao.com
NuSil R-2145
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lCgAZ3_NuSil-R-2145.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: Adhesives and Sealants Comment: Extremely Tough, Fast Cure Elastomer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum | ||
| Extrusion Rate | |||
| Part A | 275 | g/min | |
| Part B | 240 | g/min | |
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Grey | ||
| Density | 0.998 | g/cm³ | |
| Curing Time (65°C) | 2.0 | hr | |
| Pot Life | 15 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 45 | ||
| Lap Shear Strength 1 | 4.14 | MPa | |
| Tensile Strength | 7.24 | MPa | |
| Tensile Elongation at Break | 400 | % | |
| Tear Strength | 26.3 | kN/m | |
| Electric Strength | 32 | kV/mm |
| Note Message | |
|---|---|
| 1 . | Primed with CF1-135 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BY13BK6088 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Zhongfa PP pp9 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | PP, Unspecified | Zhongfa |
| Generic Nylon 1212 | Generic | Nylon 1212 | Generic |
| Mafill® CR CM 6144 | Ravago Group | PP Copolymer | Mafill® |
| ESTOPLAST XU 4001GY75 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
