Order Products : sales@su-jiao.com
Kazan LDPE 16813-070 OKP 22 111 4101
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lC8YgO_Kazan-LDPE-16813-070-OKP-22-111-4101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.917 to 0.920 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | |
| Extractables 1 | < 0.6 | % | |
| Melt Flow - Dispersin within a batch 2 | < 6.0 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 2.00 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 88.0 | MPa | |
| Break | > 88.0 | MPa | |
| Tensile Strain (Break) | > 450 | % |
| Note Message | |
|---|---|
| 1 . | Premium grade, Grade I, II |
| 2 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Styrolution PS 454N | INEOS Styrolution Group GmbH | PS (HIPS) | Styrolution PS |
| Tool-A-Thane UT-505 | Urethane Tooling & Engineering Corp | PUR, Unspecified | Tool-A-Thane |
| LUBAN™ 1102 KQH | Oman Oil Refineries & Petroleum Indistries Co. (Orpic) | PP Homopolymer | LUBAN™ |
| LUVOCOM® 1105-7709/RD VP | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| REV Materials 8006-001 | REV Materials | PP, Unspecified | REV Materials |
