Order Products : sales@su-jiao.com

Sasol Polymers PE HR477

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Sasol Polymers
Trademark:	Sasol Polymers PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lBpRoO_Sasol-Polymers-PE-HR477.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Features

High rigidity

Good impact strength

Heat and UV resistant

Hexene copolymer

Applications

Small to medium parts for rotomoulding

Large parts for injection moulding

Outdoor articles

General Information
Additive	Antioxidation demoulding UV stabilizer
Features	Rigidity, high Copolymer hexene comonomer Antioxidation Impact resistance, good Good UV resistance Heat resistance, medium Compliance of Food Exposure Good demoulding performance Medium viscosity
Uses	Outdoor application
Agency Ratings	EC 1935/2004 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(c) 3.1a
Forms	Particle
Processing Method	rotomolding Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.939	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	5.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	63		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹			ASTM D638
Yield	20.0	MPa	ASTM D638
Fracture	27.0	MPa	ASTM D638
Tensile Elongation ²(Break)	920	%	ASTM D638
Flexural Modulus	600	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	118	°C	ASTM D1525

Injection	Nominal Value	Unit
Rear Temperature	150 - 190	°C
Middle Temperature	160 - 200	°C
Front Temperature	170 - 210	°C
Nozzle Temperature	190 - 220	°C
Processing (Melt) Temp	200 - 280	°C

Injection instructions
Zone 4: 180 to 220°C

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom PE4120	Spartech Polycom	HDPE, HMW	Spartech
SUSTAMID 6 GC	Röchling Sustaplast SE & Co. KG	Nylon 6	SUSTAMID
CALIBRE™ 2060-6	Trinseo	PC	CALIBRE™
Desmopan® DP 3856D	Covestro - PUR	TPU-Polyester	Desmopan®
KEBAFORM® C 909 WR	BARLOG plastics GmbH	Acetal (POM) Copolymer	KEBAFORM® C