Order Products : sales@su-jiao.com

CALIBRE™ 200-3

Category:	PC , Polycarbonate Resin
Manufacturer:	Trinseo
Trademark:	CALIBRE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	l9gWUZ_CALIBRE-200-3.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

CALIBRE™ 200-3 polycarbonate resin is produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. This resin provides excellent impact resistance, heat distortion resistance and optical clarity as well as high melt strength for sheet extrusion applications. Available in natural color only.

Main Characteristics:

U.S. FDA 21 CFR 177.1580

CSA

NSF

Underwriters Laboratory (UL)

EU food contact 2002/72/EC

Applications:

Small appliances

Sheet and profile extrusion

Housewares

General Information
Features	Food Contact Acceptable Good Melt Strength High Clarity High Impact Resistance
Uses	Appliances Household Goods Sheet
Agency Ratings	CSA Unspecified Rating EU 2002/72/EC FDA 21 CFR 177.1580 NSF Unspecified Rating
Appearance	Natural Color
Forms	Pellets
Multi-Point Data	Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.20	g/cm³	ASTM D792, ISO 1183/B
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	3.0	g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage - Flow	0.50 to 0.70	%	ASTM D955, ISO 294-4
Water Absorption			ASTM D570, ISO 62
23°C, 24 hr	0.15	%
Equilibrium, 23°C, 50% RH	0.32	%

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ASTM D785
M-Scale	74
R-Scale	118

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
-- ¹	2480	MPa	ASTM D638
--	2480	MPa	ISO 527-2/50
Tensile Strength
Yield ²	60.0	MPa	ASTM D638
Yield	60.0	MPa	ISO 527-2/50
Break ³	72.4	MPa	ASTM D638
Break	72.0	MPa	ISO 527-2/50
Tensile Elongation
Break ⁴	150	%	ASTM D638
Break	150	%	ISO 527-2/50
Flexural Modulus
-- ⁵	2410	MPa	ASTM D790
-- ⁶	2410	MPa	ISO 178
Flexural Strength
-- ⁷	96.5	MPa	ASTM D790
-- ⁸	96.0	MPa	ISO 178
Taber Abrasion Resistance	45	%	ASTM D1044

Flammability	Nominal Value	Unit	Test Method
Average Extent of Burning	3	cm	ASTM D635

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact
23°C	960	J/m	ASTM D256
23°C	93	kJ/m²	ISO 180/A
Unnotched Izod Impact (23°C)	No Break		ASTM D256, ISO 180
Instrumented Dart Impact ⁹(23°C, Total Energy)	93.8	J	ASTM D3763
Tensile Impact Strength	630	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
0.45 MPa, Annealed	146	°C	ASTM D648, ISO 75-2/B
1.8 MPa, Unannealed	132	°C	ASTM D648, ISO 75-2/A
1.8 MPa, Annealed	143	°C	ASTM D648, ISO 75-2/A
Vicat Softening Temperature	151	°C	ISO 306/B50, ASTM D1525 ¹⁰
CLTE - Flow (-40 to 82°C)	6.8E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	2.0E+17	ohms·cm	ASTM D257
Dielectric Strength	17	kV/mm	ASTM D149, IEC 60243-1
Dielectric Constant			ASTM D150
60 Hz	3.00
1 MHz	3.00
Dissipation Factor			ASTM D150
60 Hz	1.0E-3
1 MHz	2.0E-3

Flammability	Nominal Value	Unit	Test Method
Flame Rating ¹¹			UL 94
1.60 mm	HB
3.20 mm	HB
Oxygen Index ¹²	26	%	ISO 4589-2

Optical	Nominal Value	Unit	Test Method
Refractive Index	1.586		ASTM D542, ISO 489
Transmittance	89.0	%	ASTM D1003
Haze	1.0	%	ASTM D1003

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	50 mm/min
4 .	50 mm/min
5 .	Method I (3 point load), 2.0 mm/min
6 .	2.0 mm/min
7 .	Method I (3 point load), 2.0 mm/min
8 .	2.0 mm/min
9 .	3.39 m/sec
10 .	Rate A (50°C/h), Loading 2 (50 N)
11 .	This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
12 .	This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.

Resin Grade	Manufacturer	Category	Trademark
Rilsan® BMN P40 TL	Arkema	Nylon 11	Rilsan®
RTP 6004-45A	RTP Company	TPE	RTP
Raditer® B RVA300	Radici Plastics	PBT	Raditer®
THERMOLAST® K TF4THT (Series: FC/ht)	KRAIBURG TPE	TPE	THERMOLAST® K
FLEXCHEM™ 5053	Colorite Polymers	PVC, Flexible	FLEXCHEM™