Order Products : sales@su-jiao.com
ETILINAS BPD 4028
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | POLYETHYLENE MALAYSIA SDN BHD |
| Trademark: | ETILINAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l7kGt3_ETILINAS-BPD-4028.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ETILINAS BPD 4028 is a natural MDPE compound designed specifically for colourable (non black) communication and power cable jacketing. It can be coloured by means of a high quality colour masterbach intended for wire and cable applications. ETILINAS BPD 4028 does not contain UV stabilisation and so cables jacketed with this material must be protected from direct sunlight both in storage and in subsequent installation. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.30 | g/10 min | ISO 1133 |
| 190°C/5.0 kg | 1.2 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 58 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 700 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -100 | °C | ASTM D746 |
| Vicat Softening Temperature | 116 | °C | ISO 306/A |
| CLTE - Flow (20 to 60°C) | 1.5E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Strength | 20 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 2.50 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 1.0E-3 | IEC 60250 |
| Additional Information |
|---|
| Tensile Stress at Yield, IEC 811-1-1: 18 MPaElongation at Break, IEC 811-1-1: >600%Thermal Conductivity, BS 874, 23°C: 0.4 W/m/°COxidation Induction Time, ISO TR10837, 210°C: >20 minEnvironmental Stress Crack Resistance, IEC 811-4-1, F0: >1000 hr |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 - 225 | °C |
| Extrusion instructions |
|---|
| Suggested Screen Pack: 40/80 Mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1307 MS 5 | RTP Company | PPS | RTP |
| RAMTOUGH PZ305G4 | Polyram Ram-On Industries | PC | RAMTOUGH |
| Flexalloy® 9606-65 | Teknor Apex Company | PVC Elastomer | Flexalloy® |
| ICORENE® N4507 | ICO Polymers EMEA, A Division of A. Schulman | PP Random Copolymer | ICORENE® |
| POLYCASA® XT | Polycasa | Acrylic (PMMA) | POLYCASA® |
