Order Products : sales@su-jiao.com
ESENTTIA 11H01A
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l5eFyU_ESENTTIA-11H01A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Medium melt flow rate Homopolymer polypropylene with good impact/stiffness balance, with antistatic additive. Recommended for: Injection molding of rigid articles, closures, general purpose injection molding applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1520 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 40 | J/m | ASTM D256A |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2181 HEC | RTP Company | PEI | RTP |
| MFE® -11 | Huachang Polymer Co., Ltd. | Vinyl Ester | MFE® |
| WELLAMID Nylon 6000 MR 209 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| POLYfill PPH K20020 | Polykemi AB | PP Homopolymer | POLYfill |
| Rotuba CAB B902 (5% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
