Order Products : sales@su-jiao.com
PEARLCOAT® DIPP 119
| Category: | TPU-Capro , Thermoplastic Polyurethane Elastomer (Polycaprolactone) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | PEARLCOAT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l5NT9C_PEARLCOATDIPP119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pearlbond™ DIPP-119 is polycaprolactone copolyester based thermoplastic polyurethane, supplied in form of translucent pellets. Featuring low melting point and excellent transparency, this product offers excellent flexibility, elasticity and easy processing. Ideally used for extrusion or compounding with PVC. APPLICATIONS Pearlbond™ DIPP-119 is used mostly in extrusion applications where low melting point as well as improved adhesion over polar substrates is highly appreciated. It is ideal for PVC compounding. It is also used in solvent coatings on textile substrates. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.16 | g/cm³ | ASTM D792 |
| 20°C | 1.16 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 - 50 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| -- | 12.0 | MPa | ISO 527-2 |
| 100% strain | 2.00 | MPa | ISO 527-2 |
| 300% strain | 3.00 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 800 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 2.00 | MPa | ASTM D412 |
| 300% strain | 3.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 12.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 100 - 110 | °C | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Softening Range | 90 - 100 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70 - 80 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Cylinder Zone 1 Temp. | 120 - 130 | °C | |
| Cylinder Zone 2 Temp. | 145 - 155 | °C | |
| Cylinder Zone 3 Temp. | 160 - 170 | °C | |
| Cylinder Zone 4 Temp. | 165 - 175 | °C | |
| Die Temperature | 145 - 155 | °C |
| Note Message | |
|---|---|
| 1 . | 20°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 718 V30 BLACK 61 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| SLOVALEN® PH 92 T 40 | Plastcom | PP, Unspecified | SLOVALEN® |
| TEREZ PA 6.6 7500 GF 25 FLB/2 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Alpha PVC 2212RHT/1-118 CLEAR 080X | AlphaGary | PVC, Rigid | Alpha PVC |
| Andur 800 AP | Anderson Development Company | PUR-Est/eth,TDI | Andur |
