Order Products : sales@su-jiao.com
TECACOMP® PA66 CF15 black 4058
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ensinger GmbH |
| Trademark: | TECACOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l4D4SC_TECACOMPPA66CF15black4058.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TECACOMP®PA66 CF15 black 4058 is a polyamide 66 (nylon 66) product that contains 15% carbon fiber reinforcement. It can be processed by injection molding and is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (280°C/5.0 kg) | 88 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (280°C/5.0 kg) | 84.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow | 1.0 | % | ISO 294-4 |
| Flow | 0.30 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 11800 | MPa | ISO 527-2/50 |
| Tensile Stress | 200 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 40 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 253 | °C | ISO 75-2/A |
| Glass Transition Temperature | DIN 53765 | ||
| -- 1 | 5.00 | °C | DIN 53765 |
| -- 2 | 72.0 | °C | DIN 53765 |
| Melting Temperature | 260 | °C | DIN 53765 |
| Service Temperature | |||
| long term | 110 | °C | |
| short term | 170 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+3 | ohms | DIN EN 61340 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 280 - 300 | °C | |
| Mold Temperature | 80 - 120 | °C |
| Note Message | |
|---|---|
| 1 . | Moist |
| 2 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silopren® LSR 2630 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| ASTAMID™ MA3WG63 | Marplex Australia Pty. Ltd. | Nylon 66 | ASTAMID™ |
| Delrin® 500SC NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Geon™ Vinyl Rigid Molding M7500 | PolyOne Corporation | PVC Alloy | Geon™ Vinyl Rigid Molding |
| POFEX EP8300S 80A/80C | POLYROCKS CHEMICAL CO., LTD | TPU, Unspecified | POFEX |
