Order Products : sales@su-jiao.com
HYDEL® PC-P ESD
| Category: | PC , Polycarbonate |
| Manufacturer: | Ensinger Inc. |
| Trademark: | HYDEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l0zGZQ_HYDEL-PC-P-ESD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
In recent years, industry has demanded a range of materials that not only possess strength, wear properties, heat and chemical resistance but materials that are less resistive to the build-up of a static charge. Ensinger has a family of such materials; their properties are listed on the reverse side of this sheet and described below. HYDEL PC-P ESD polycarbonate is a static dissipative thermoplastic product containing carbon powder. This material has good stiffness, excellent dimensional ability, and low outgassing properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| Saturation | 0.18 | % | ASTM D570 |
| Balance | 0.18 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 65.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Flexural Strength | 107 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 132 | °C | |
| Heat Deflection Temperature | 132 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+7 - 1.0E+12 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-2 | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REXtac® APAO RT 1310 | Huntsman Corporation | PAO | REXtac® APAO |
| Spartech Polycom SC7-7010 | Spartech Polycom | PC | Spartech |
| TOTAL Polypropylene PPH 3230XZ | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| NuSil MED50-5438 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| Ad-Tech Epoxy EL-336 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
