Order Products : sales@su-jiao.com
RTP EMI 260.7A
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l0hiCv_RTP-EMI-260-7A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 1.0 - 1.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2760 | MPa | ASTM D638 |
| Tensile Strength | 52.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2410 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 83.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 960 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+6 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+2 | ohms·cm | ASTM D257 |
| Additional Information |
|---|
| Static Decay MIL-PRF-81705D, FTMS-4046.1: <2 sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 - 271 | °C | |
| Middle Temperature | 221 - 271 | °C | |
| Front Temperature | 221 - 271 | °C | |
| Mold Temperature | 54.0 - 93.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultralloy™ 307 | Hapco Inc. | TP, Unspecified | Ultralloy™ |
| APEX® 87-L492-A | Teknor Apex Company | PVC, Flexible | APEX® |
| Lifocork® UV 701021-2 | ELASTO | TPE | Lifocork® |
| LNP™ THERMOCOMP™ IF003 compound | SABIC Innovative Plastics | Nylon 612 | LNP™ THERMOCOMP™ |
| Lucofin® 1454 | Lucobit AG | Polyolefin, Unspecified | Lucofin® |
