Order Products : sales@su-jiao.com
Polifil® PP RMC-40V
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l0OhOg_Polifil-PP-RMC-40V.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Additive packages are available to enhance UV properties or to meet FDA requirements. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (1.59 mm) | 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 87 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 21.7 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 2480 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 48 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | No Break | ASTM D256 | |
| Gardner Impact | 5.42 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 113 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 to 204 | °C | |
| Middle Temperature | 199 to 210 | °C | |
| Front Temperature | 204 to 216 | °C | |
| Nozzle Temperature | 210 to 221 | °C | |
| Mold Temperature | 48.9 to 65.6 | °C | |
| Injection Pressure | 82.7 to 110 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 68.9 to 103 | MPa | |
| Back Pressure | 0.345 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SI30VI02BWX | Triesa Plastics | Nylon 6 | BESTNYL |
| Huaxia Shenzhou FKM DS2603-2 | Shandong Huaxia Shenzhou New Material Co., Ltd. | Fluorelastomer | Huaxia Shenzhou |
| I. Stern N2560 | I. STERN & CO. INC. | PS (GPPS) | I. Stern |
| Braskem PE GE7252XP | Braskem | HDPE | Braskem PE |
| NILAMID® XS3 GF30 | Nilit Plastics | Nylon, Unspecified | NILAMID® |
