Order Products : sales@su-jiao.com
CarboSil™ 20 90A
| Category: | TPU-PC , Thermoplastic Polyurethane Elastomer (PC Based) |
| Manufacturer: | DSM Biomedical Inc. |
| Trademark: | CarboSil™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l0KB2S_CarboSil-20-90A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CarboSil™ 20 90A is a Thermoplastic Polyurethane Elastomer (PC Based) (TPU-PC) product. It can be processed by coating, compression molding, dip coating, extrusion, injection molding, or spraying and is available in North America. Applications of CarboSil™ 20 90A include medical/healthcare and food contact applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (224°C/1.2 kg) | 27 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 40.0 | MPa | ASTM D1708 |
| Tensile Stress | ASTM D1708 | ||
| 50% Strain | 7.46 | MPa | |
| 100% Strain | 9.83 | MPa | |
| 300% Strain | 26.1 | MPa | |
| Tensile Elongation (Break) | 420 | % | ASTM D1708 |
| Flexural Modulus - 1% Secant | 40.7 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 57.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 87.6 | kN/m | ASTM D624 |
| Compression Set (25°C, 22 hr) | 15 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -4.00 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 188 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bergamid™ B70 G15 U-SO BK060 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| DeWAL DW 402 | DeWAL Industries | UHMWPE | DeWAL |
| ISPLEN® PM 460 AS | REPSOL | PP Homopolymer | ISPLEN® |
| REV Materials 8003-002 | REV Materials | PP, Unspecified | REV Materials |
| Techsil® TIM11123 (GB) | Techsil Limited | Silicone Rubber, RTV-1 | Techsil® |
