Order Products : sales@su-jiao.com
SUSTADUR PET
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Röchling Sustaplast SE & Co. KG |
| Trademark: | SUSTADUR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l05yMN_SUSTADUR-PET.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Product characteristics
Typical fields of application
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.38 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.25 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 84 | ISO 868 | |
| Ball Indentation Hardness | 170 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 85.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 15 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 80.0 | °C | ISO 75-2/A |
| Continuous Use Temperature | |||
| -- 1 | -20.0 to 115 | °C | |
| -- 2 | < 180 | °C | |
| Melting Temperature | 255 | °C | ISO 11357-3 |
| CLTE - Flow | 6.0E-5 | cm/cm/°C | DIN 53752 |
| Thermal Conductivity | 0.28 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+18 | ohms·cm | IEC 60093 |
| Electric Strength | 20 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.40 | IEC 60250 | |
| Dissipation Factor (50 Hz) | 1.0E-3 | IEC 60250 | |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | HB | ||
| 6.00 mm | HB |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mytex® AS78L-GM | Mytex Polymers | TPO | Mytex® |
| GERMAMID 6 KSZ | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| En Chuan 6133WAL | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| ESPRENE EPDM 400 | Sumitomo Chemical Co., Ltd. | EPDM | ESPRENE EPDM |
| Kumho PS HI 425 | Korea Kumho Petrochemical Co., Ltd. | PS (HIPS) | Kumho PS |
