Order Products : sales@su-jiao.com
TITANPRO® PM383
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Lotte Chemical Titan (M) Sdn. Bhd. |
| Trademark: | TITANPRO® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kwLlQM_TITANPRO-PM383.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene homopolymer. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDA criteria covering safe use of polyolefin articles and component of articles intended for food contact use. TSCA Registry: CAS# 9003-07-0 APPLICATIONS: Oriented film for food and garment packaging, adhesive tape, lamination, photo album, pearlized film, etc. Characteristics: Outstanding processability, maximum bubble stability for slit tape production by the tubular process, good melt stability and low color, low taste & odor. FABRICATION: Equipment - general extrusion machines and techniques - standard processing for tubular and flat die tapes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.9 | g/10 min | ASTM D1238 |
| Water Absorption (24 hr) | 0.020 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus | 1520 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXUS PE LDPE-0719 | Nexus Resin Group, LLC. | LDPE | NEXUS PE |
| NYCOA Polyamide 7551 Nat | Nycoa (Nylon Corporation of America) | Nylon 12 | NYCOA Polyamide |
| CompaMid® PA 6 GF 10 M 20 | DimeLika Plast GmbH | Nylon 6 | CompaMid® |
| POLYfill PPC GF2007 PD1 | Polykemi AB | PP Copolymer | POLYfill |
| Sylvin 2964-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
