Order Products : sales@su-jiao.com

KMI PP KM-699IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kroEYd_KMIPPKM699IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-699IB is an ultra high flow impact PP resin for injection molding applications. It is reactor-made block PP, which exhibits high rigidity as well as excellent impact strength due to well-designed resin structure. In addition, it shows better shrinkage property than conventional impact PPs. It is suitable for the injection molding of large-scale articles, base-resin for PP compounds, and thin products. Characteristics: High flow ability: MI>100, reactor-made product Excellent balance between stiffness & imapct strength

Message

KM-699IB is an ultra high flow impact PP resin for injection molding applications. It is reactor-made block PP, which exhibits high rigidity as well as excellent impact strength due to well-designed resin structure. In addition, it shows better shrinkage property than conventional impact PPs. It is suitable for the injection molding of large-scale articles, base-resin for PP compounds, and thin products.

Characteristics:

High flow ability: MI>100, reactor-made product

Excellent balance between stiffness & imapct strength

General Information
Features	Block Copolymer Rigidity, high Impact copolymer Impact resistance, high High liquidity
Uses	Thin wall parts Composite
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	100	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	90		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	29.4	MPa	ASTM D638
Tensile Elongation (Break)	< 20	%	ASTM D638
Flexural Modulus	1570	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	44	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	125	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
SABIC® PPcompound 19T1030	SABIC Innovative Plastics	PP, Unspecified	SABIC® PPcompound
VECTRA® A950	Celanese Corporation	LCP	VECTRA®
Hyundai EP PPF HT121	HYUNDAI EP Co., Ltd.	PP Homopolymer	Hyundai EP PPF
Cellasto® MH24-35	BASF Polyurethanes GmbH	TPU, Unspecified	Cellasto®
GELOY™ XP4034 resin	SABIC Innovative Plastics	ASA+PC	GELOY™