Order Products : sales@su-jiao.com
Alathon® M5040
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kplMp6_Alathon-M5040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Alathon M5040 is a copolymer with broad molecular weight distribution. This resin exhibits excellent color, low odor, and good processing stability. Typical applications for this resin are specialty applications with high ESCR and applications requiring a balance of ESCR, impact and processibility. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Spiral Flow | 28.4 | cm | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 71 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield 1 | 25.6 | MPa | |
| Break | 14.1 | MPa | |
| Tensile Elongation 2(Yield) | 13 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% Secant | 1040 | MPa | |
| 2% Secant | 862 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 66.1 | °C | ASTM D648 |
| Brittleness Temperature | < -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 232 | °C | |
| Middle Temperature | 243 | °C | |
| Front Temperature | 246 | °C | |
| Nozzle Temperature | 246 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66/6 GF 15 GB 15 | Plastcom | Nylon 66/6 | SLOVAMID® 66/6 |
| Ferro PP LPP40BD23WH | Ferro Corporation | PP Homopolymer | Ferro PP |
| INEOS HDPE T60-800-119 | INEOS Olefins & Polymers USA | HDPE | INEOS HDPE |
| Wanthane® WHT-8180RV | Wanhua Chemical Group Co., Ltd. | TPU-Polyether | Wanthane® |
| Sylvin 9600-100UV Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
