Order Products : sales@su-jiao.com
KRATON® D1107 J
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kp4OGh_KRATON-D1107-J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1107 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature.
Kraton D1107 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.4 to 3.4 | g/10 min | ISO 1133 |
| Bound Styrene | 15.0 | % | Internal Method |
| Ash Content | ISO 247 | ||
| JS | < 2.5 | wt% | |
| JSP | < 1.0 | wt% | |
| JU | < 1.0 | wt% | |
| Viscosity (25°C) 1 | < 1.00 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec) | 37 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 0.193 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1300 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.00483 | MPa | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Sol (Toluene) 25.0%w |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WELLAMID Nylon 6000 GS 50 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| Chemical Resources PP 1200NW4 | Chemical Resources, Inc. | PP Homopolymer | Chemical Resources |
| Devlon Acetal Copolymer | Devol® Engineering Polymers | Acetal (POM) Copolymer | Devlon |
| Envir® PA6G33TL-BK0801 | Barnet | Nylon 6 | Envir® |
| LEXAN™ HPS1R resin | SABIC Innovative Plastics | PC | LEXAN™ |
