Order Products : sales@su-jiao.com
OnFlex™ U 5370A-S0015
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | koUHiW_OnFlex-U-5370A-S0015.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-U thermoplastic elastomer polymer is a mixture of thermoplastic polyurethane elastomer (TPE-U). OnFlex™-U 5300 series products are alloys of SEBS and TPU, which combine the advantages of these two raw materials, such as good processability, a TPE-S soft touch, excellent mechanical properties, and a TPE-U abrasion resistance. OnFlex™-U 5300 polymer has very good scratch resistance, large hardness range and good chemical resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance | 57.0 | mm³ | ISO 47469 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| General Material Type | Thermoplastic polyurethane elastomer (TPU) |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% strain | 4.00 | MPa | ISO 37 |
| 300% strain | 9.30 | MPa | ISO 37 |
| Tensile Stress (Break) | 25.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 520 | % | ISO 37 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 170 - 210 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIMID® N66-G13HL | Polymer Technology and Services, LLC | Nylon 66 | TRIMID® |
| Varcum 29315P | Durez Corporation | Phenolic | Varcum |
| AKROMID® B3 M 40 natural (2795) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Andur 8-5 APLS/Curene® 442 | Anderson Development Company | PUR-Ester/TDI | Andur |
| Clariant Nylon 6/6 PA-113CF30 TF15 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
