Order Products : sales@su-jiao.com
RTP 1400 R-4300 UV
| Category: | PC+PES , Polycarbonate + PES |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | koBGNE_RTP-1400-R-4300-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.32 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.65 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2620 | MPa | ASTM D638 |
| Tensile Strength | 76.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2620 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 114 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 210 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1800 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 182 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 343 to 366 | °C | |
| Middle Temperature | 343 to 366 | °C | |
| Front Temperature | 343 to 366 | °C | |
| Mold Temperature | 135 to 177 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP7215 G41 | Spartech Polycom | PP Copolymer | Spartech |
| TyrFil® MG-25 | Pathway Polymers | PUR-MDI | TyrFil® |
| ACCUCOMP™ PET008L | ACLO Compounders Inc. | PET | ACCUCOMP™ |
| ALCOM® AWL 10/3 WT1308-05LB | ALBIS PLASTIC GmbH | ABS | ALCOM® AWL |
| Optimum® 2014-XE | RAUH Polymers, Inc. | Copolyester | Optimum® |
