Order Products : sales@su-jiao.com
Veroplas SER20NF
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | PlastxWorld Inc. |
| Trademark: | Veroplas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | klIoyL_Veroplas-SER20NF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Veroplas SER20NF is an acrylonitrile butadiene styrene (ABS) product,. It can be processed by injection molding and is available in North America or Europe. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 80 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.40 - 0.60 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 40.0 | MPa | ISO 527-2 |
| Flexural Modulus | 2400 | MPa | ISO 178 |
| Flexural Stress | 65.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 15 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 90.0 | °C | ISO 306/A50 |
| -- | 80.0 | °C | ISO 306/B50 |
| -- | 82.0 | °C | ISO 306/B120 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm, All | V-1 | UL 94 | |
| 2.00 mm, All | V-0 | UL 94 | |
| 2.50 mm, All | 5VA | UL 94 |
| Additional Information |
|---|
| The value listed as Mold Shrinkage, ISO 294, was tested in accordance with ISO 2577. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 - 85.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 160 - 180 | °C | |
| Middle Temperature | 180 - 200 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Processing (Melt) Temp | 180 - 230 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 48.3 - 96.5 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 1.38 | MPa | |
| Screw Speed | 40 - 60 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIBOCOMP® PA66 GF40 TS5 | EPIC Polymers | Nylon 66 | TRIBOCOMP® |
| Ultradur® B 4300 G2 | BASF Corporation | PBT | Ultradur® |
| Karina MB CONC OF PIGM BROWN -E 36/597-FC-LMP | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Sylvin 9940-60 Orange 590 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ULTEM™ 2210R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
