Order Products : sales@su-jiao.com
WELLAMID Nylon 6000/42 GS 30 HWCP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | CP-Polymer-Technik GmbH & Co. KG |
| Trademark: | WELLAMID Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kl3pW6_WELLAMIDNylon600042GS30HWCP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WELLAMID Nylon 6000/42 GS 30 HWCP is a polyamide 6 (nylon 6) material containing 30% glass beads. This product is available in Europe,. The main features of WELLAMID Nylon 6000/42 GS 30 HWCP are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.33 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ||||
| Transverse flow : 4.00mm | 0.80 - 1.3 | -- | % | |
| Flow : 4.00mm | 0.80 - 1.3 | -- | % | |
| Water Absorption (Saturation, 23°C) | 1.5 - 2.0 | -- | % | DIN 53495 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 3100 | 1300 | MPa | ISO 527-2 |
| Tensile Stress | 52.0 | 35.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break) | 7.0 | 20 | % | ISO 527-2/5 |
| Flexural Modulus | 2600 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | 17 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 50 | 80 | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 180 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 70.0 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 200 | -- | °C | ISO 306/B50 |
| Melting Temperature | 215 | -- | °C | |
| CLTE - Flow (23 to 80°C) | 3.5E-5 | -- | cm/cm/°C | DIN 53752 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Dielectric Strength | 35 | 35 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 4.00 | 6.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.020 | 0.20 | IEC 60250 | |
| Comparative Tracking Index | 450 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.6 mm | HB | HB | UL 94 | |
| 3.2 mm | HB | HB | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 250 - 270 | °C | |
| Mold Temperature | 60 - 90 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Milastomer™ 5030NHS | Mitsui Chemicals America, Inc. | TPV | Milastomer™ |
| RJM SN501G30-W | RJM International, Inc. | Nylon 6 | RJM |
| NAXALOY® 780 | MRC Polymers, Inc. | PC+PBT | NAXALOY® |
| Nipol® 1432 | Zeon Chemicals L.P. | NBR | Nipol® |
| DELPET™ SRG095 | Asahi Kasei Chemicals Corporation | Acrylic (PMMA) | DELPET™ |
