Order Products : sales@su-jiao.com

ESENTTIA 25C35-EC

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kkqQFl_ESENTTIA-25C35-EC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: Controlled rheology polypropylene homopolymer, medium molecular weight distribution, with high fluidity, with special additives for use on thin coatings at high line speeds to obtain excellent uniformity and adhesion, low neck-in, and thinning (draw-drown) and good properties.

Recommended for: Extrusion coating of raffia, paper and other substrates, aluminum and paper laminating.

General Information
Additive	Unspecified Additive
Features	Block Copolymer Controlled Rheology Food Contact Acceptable Good Adhesion High Flow Low Neck-In Med.-Wide Molecular Weight Distrib.
Uses	Coating Applications Laminates Paper Coatings
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	25	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	29.0	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	9.5	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1170	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	40	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
MELMEX MG	BIP (Oldbury) Limited	Mel Formald	MELMEX
RJM SF401G10	RJM International, Inc.	PPE	RJM
Flontech® FT-1-BLU2-FM-6	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
FR-PET® C3015FA	Polyplastics Co., Ltd.	PET	FR-PET®
Sylvin 9219-75 White 1485	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin