Order Products : sales@su-jiao.com
Milastomer™ M3800BS
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | Milastomer™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kkRW8Q_Milastomer-M3800BS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Milastomer™M3800BS is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America and is processed by injection molding. Milastomer™Typical application areas of M3800BS are: handles |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 40 | ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 9.70 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 14.8 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 700 | % | ISO 37 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | Internal method |
| Additional Information |
|---|
| All tests performed according to Mitsui methods. |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinkolite PX | Mitsubishi Rayon Co., Ltd. | Acrylic (PMMA) | Shinkolite |
| UBESTA XPA 9055 X2 | UBE Engineering Plastics, S.A. | Nylon 12 Elast | UBESTA |
| Formolene® HB6007 | Formosa Plastics Corporation, U.S.A. | HDPE | Formolene® |
| LIHAN® B100 | Nanjing Lihan Chemical Co., Ltd. | Nylon 6 | LIHAN® |
| LNP™ VERTON™ RV00CESS compound | SABIC Innovative Plastics | Nylon 66 | LNP™ VERTON™ |
