Order Products : sales@su-jiao.com
Garaflex™ G 7795-A7 NAT
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Garaflex™ G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | khVWeW_Garaflex-G-7795-A7-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARAFLEX G 7795-A7 IS A FLAME RETARDANT THERMOPLASTIC ELASTOMER INTENDED FOR APPLIANCE AND AUTOMOTIVE WIRING (125C DEGREE). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 to 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 48 | ||
| Shore D, 15 sec | 44 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 17.2 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 550 | % | ASTM D412 |
| Tear Strength 1(1.91 mm) | 65.7 | kN/m | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 2 | UL Unspecified | ||
| 136°C, 168 hr | 0.0 | % | |
| 158°C, 168 hr | -15 | % | |
| Change in Ultimate Elongation in Air 3 | UL Unspecified | ||
| 136°C, 168 hr | -3.0 | % | |
| 158°C, 168 hr | -35 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 2.5E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 27 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C, 1 MHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (23°C, 1 MHz) | 2.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 30 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 188 | °C | |
| Cylinder Zone 3 Temp. | 193 | °C | |
| Cylinder Zone 4 Temp. | 199 | °C | |
| Cylinder Zone 5 Temp. | 204 | °C | |
| Adapter Temperature | 204 | °C | |
| Melt Temperature | 196 | °C | |
| Die Temperature | 204 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Thickness: 30 mil |
| 3 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx FP62E33 | The Matrixx Group, Inc. | Nylon 6 | Matrixx |
| Polytron® P40B01 | Polyram Ram-On Industries | PP Homopolymer | Polytron® |
| Salflex 815CI | Salflex Polymers Ltd. | PP Copolymer | Salflex |
| Anjacom® R050/7020 Black 91001 | Almaak International GmbH | PC+ABS | Anjacom® |
| HiFill® TPX-HTN-03002 A | Techmer Engineered Solutions | Nylon, Unspecified | HiFill® |
