Order Products : sales@su-jiao.com
CERTENE™ SGM-170
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Channel Prime Alliance |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kgU0p7_CERTENESGM170.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SGM-170 is a certified prime high flow GPPS grade and is excellent over intricated molds and thin wall applications. It is optimal for high injection molding cycles. SGM-170 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 17 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2760 | MPa | ASTM D638 |
| Tensile Strength (Break, Injection Molded) | 33.1 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 2.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 2960 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (mm, injection molding) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 73.9 | °C | ASTM D648 |
| Vicat Softening Temperature | 81.1 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 90.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC V903 NAT601 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Sasol Polymers PE HR411 | Sasol Polymers | LLDPE | Sasol Polymers PE |
| Ultramid® Aqua UV BK20592 | BASF Corporation | Nylon 66 | Ultramid® |
| AVP™ ZLL12CP | SABIC Innovative Plastics | PC | AVP™ |
| ICORENE® 3979 | ICO Polymers APAC, A Division of A. Schulman | mHDPE | ICORENE® |
