Order Products : sales@su-jiao.com
3M™ Dyneon™ PTFE Compound TF 6404
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE Compound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kaKIN1_3M-Dyneon-PTFE-Compound-TF-6404.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 3.01 | g/cm³ | ASTM D4745-06 |
| Apparent Density | 1.05 | g/cm³ | ASTM D4894-07 |
| Molding Shrinkage - Flow | 1.8 | % | ASTM D4894-07 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness 1(Shore D) | 68 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break) | 25.0 | MPa | ASTM D4745-06 |
| Tensile Elongation 3(Break) | 330 | % | ASTM D4745-06 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | 55.0 | MPa | |
| Compression Molding Temperature | 23 to 26 | °C | |
| Sintering Temperature | < 365 | °C |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| 3 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Cellophane™ 600P | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| CP PRYME® ABS A220G | Chase Plastics Services Inc. | ABS | CP PRYME® ABS |
| DINAPLEN® PPH1S20 M403 | Grupo Repol | PP Homopolymer | DINAPLEN® |
| GAPEX® FPP30GQ17NA NATURAL | Ferro Corporation | PP, Unspecified | GAPEX® |
| POLYfill PP EIP5025 F VT2 | Polykemi AB | PP+EPDM | POLYfill |
