Order Products : sales@su-jiao.com
KOPEL® KP3855FB
| Category: | TPEE , Thermoplastic Polyester Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kUeux9_KOPEL-KP3855FB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPEL® KP3855FB is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (240°C/2.16 kg) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.6 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.020 | % | ASTM D4019 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 29.4 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 470 | % | ASTM D638 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 5.00 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 190 | °C | ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ECONAMID® 6GB30FL | DOMO Engineering Plastics SPA | Nylon 6 | ECONAMID® |
| KEP® 570F | Kumho Polychem Co., Ltd. | EPDM | KEP® |
| IDI BMC B10 (Glass Content 10%) | IDI Composites International | TS, Unspecified | IDI BMC |
| Plexiglas® Frosted DR®-66080 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
| POLYfill PPH GF4030 PD2 | Polykemi AB | PP Homopolymer | POLYfill |
