Order Products : sales@su-jiao.com

Arak HDPE EX3 (GM5010T2N)

Category:	HDPE , High Density Polyethylene
Manufacturer:	Shazand (Arak) Petrochemical Corporation
Trademark:	Arak HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kUQ2xQ_Arak-HDPE-EX3-GM5010T2N-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EX3 (M5010T2N) is high molecular weight, high density polyethylene copolymers, developed as general purpose resin for use in pressure and non-pressure pipes. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. EX3 (GM5010T2N) offer excellent chemical resistance and environmental stress crack resistance. EX3 (GM5010T2N) is suitable for extrusion into a full range of pipe and fittings sizes, where high density resins are required. EX3 (GM5010T2N) is suitable for use in transport of a wide range of fluids for industrial, rural and mining applications. Suitability for use in any application should be determined by appropriate performance testing. * EX3 (GM5010T2N) is suitable for food contact.

Message

EX3 (M5010T2N) is high molecular weight, high density polyethylene copolymers, developed as general purpose resin for use in pressure and non-pressure pipes.
A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. EX3 (GM5010T2N) offer excellent chemical resistance and environmental stress crack resistance.
EX3 (GM5010T2N) is suitable for extrusion into a full range of pipe and fittings sizes, where high density resins are required.
EX3 (GM5010T2N) is suitable for use in transport of a wide range of fluids for industrial, rural and mining applications.
Suitability for use in any application should be determined by appropriate performance testing.

* EX3 (GM5010T2N) is suitable for food contact.

General Information
Features	Copolymer Food Contact Acceptable Good Chemical Resistance High ESCR (Stress Crack Resist.) High Molecular Weight
Uses	Fittings Piping
Processing Method	Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.944	g/cm³	DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	0.50	g/10 min	DIN 53735

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	22	kJ/m²	ISO 179

Additional Information	Nominal Value	Unit	Test Method
Resistance to Internal Pressure ¹(80°C)	< 7.1	day	DIN 8074
Volatiles	0.2	wt%	Internal Method

Note Message
1 .	4N/mm²

Resin Grade	Manufacturer	Category	Trademark
NuSil CV-2391	NuSil Technology	Silicone	NuSil
Chemlon® 125 GVH	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
Hifax CA 212 A	LyondellBasell Industries	Polyolefin, Unspecified	Hifax
Sylvin 4280-80FUV Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
LNP™ LUBRICOMP™ SCL36 compound	SABIC Innovative Plastics	Nylon 12	LNP™ LUBRICOMP™