Order Products : sales@su-jiao.com
Elastamax™ TM0200-0085 Black
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Elastamax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kUMEKf_Elastamax-TM0200-0085-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance of physical properties and processability, and are an economical alternative to traditional thermoset rubber and more costly thermoplastic elastomers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 89 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 9.65 | MPa | ASTM D412A |
| Tensile Elongation 2(Break) | 700 | % | ASTM D412A |
| Tear Strength 3 | 59.5 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 290 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | Die C, 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP532J | LyondellBasell Industries | PP Homopolymer | Moplen |
| Andur 7500 DP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| CERTENE™ LLGF-123D | Muehlstein | LLDPE | CERTENE™ |
| Daelim Po1y® LD-41 | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| PLEXIGLAS® Sheet Optical RP Control 7D009 | Evonik Industries AG | Acrylic (PMMA) | PLEXIGLAS® Sheet |
