Order Products : sales@su-jiao.com
Generic Nylon 11 - Glass Fiber
| Category: | Nylon 11 , Polyamide 11 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kRnOAx_Generic-Nylon-11---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 11 - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 - 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.15 - 0.51 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.10 - 0.12 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 108 - 112 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2760 - 11000 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 2.5 - 2.8 | % | ASTM D638 |
| Fracture, 23°C | 2.7 - 10 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2410 - 8480 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 96.5 - 221 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 58 - 240 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 370 - 1200 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 170 - 178 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 - 82.2 | °C | |
| Processing (Melt) Temp | 243 - 256 | °C | |
| Mold Temperature | 48.9 - 51.7 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 11 - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TW271F8 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| SUMIKASUPER® LCP E5006L | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| Titalon® 4100GF | Titan Plastics Compounds Co., Ltd. | Nylon 46 | Titalon® |
| Ebalta MG 425 / PUR 19 | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| OTECH ALLOY OM5130-Boot | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
