Order Products : sales@su-jiao.com
Badaflex® TPE-S 50A 2039
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kQUK6t_Badaflex-TPE-S-50A-2039.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer as a standard injection moulding grade based on SBS Copolymer Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 50 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 6.00 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 500 | % | DIN 53504 |
| Compression Set (23°C, 72 hr) | 34 | % | DIN 53515 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 19.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REVOLVE® N-109 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| Starflam BFR460B | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Witcom PA66 6C/3L3 | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| Haysite SMC 44500 | Haysite Reinforced Plastics | Polyester, TS | Haysite SMC |
| KumhoSunny PC 2503I | Shanghai KumhoSunny Plastics Co., Ltd. | PC | KumhoSunny PC |
