Order Products : sales@su-jiao.com
VYLOPET® EMC132-01
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | VYLOPET® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kQ5yMQ_VYLOPET-EMC132-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VYLOPET®EMC132-01 is a polycarbonate polybutene terephthalate (PC PBT) product,. It is available in North America. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.00 mm) | 0.90 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.050 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 145 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 12000 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 220 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 77 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 245 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 215 | °C | ASTM D648 |
| Melting Temperature | 255 | °C | DSC |
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 25 | kV/mm | ASTM D149 |
| Arc Resistance | 83.0 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.787 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| Ball Pressure Temperature, UL746, Method B: 225 °CComparative Tracking Index, IEC Pub1.112: Class 3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 250 - 260 | °C | |
| Mold Temperature | 90.0 - 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIMMA® SD6390H | Samyang Corporation | Acrylic (PMMA) | TRIMMA® |
| NYCOA Polyamide 446 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| Hylon® N1000STHL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| ESTOPLAST EP 2020WV20 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| Monprene® CP-30120 XRD (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
