Order Products : sales@su-jiao.com
SEQUEL® 1718 FP BLK
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kPmGGT_SEQUEL1718FPBLK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sequel 1718 FP BLK medium high melt flow, medium high flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density 1(23°C) | 1.05 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 2(Yield, 23°C) | 20.0 | MPa | |
| Flexural Modulus 3(23°C) | 1600 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 89.0 | °C |
| Note Message | |
|---|---|
| 1 . | Method A |
| 2 . | 50 mm/min |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 GYBHVN | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| ASTALAC™ ASA 305 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| LOTTMER HX-086AB | Lotte Chemical Corporation | TPE | LOTTMER |
| Petrothene® NA480178 | LyondellBasell Industries | LDPE | Petrothene® |
| NYLOY® MS-0200N-3-H | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
