Order Products : sales@su-jiao.com
Riblene® MR 30
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Riblene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kMiWrA_Riblene-MR-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Riblene MR 30 is a low density polyethylene resin (LDPE) characterized by a high flowability and a medium rigidity. Parts made by Riblene MR 30 are characterised by good mechanical and optical properties. Main Application Riblene MR 30 is ideal for injection moulding applications. Riblene MR 30 is recommended for houseware, high gloss toys and low thickness articles. Because of its fluidity, Riblene MR 30 is also recommended for masterbatches production. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 50 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 12.0 | MPa | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 180 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -15.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.0 | °C | ISO 306/A |
| Melting Temperature | 111 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 200 | °C | |
| Middle Temperature | 160 to 200 | °C | |
| Front Temperature | 160 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mowital® B 60 HH | Kuraray Co., Ltd. | PVB | Mowital® |
| TECASON™ P XRO | Ensinger Inc. | PPSU | TECASON™ |
| BMC 501E | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Hifax TRC 103P R299 | LyondellBasell Industries | PP Impact Copolymer | Hifax |
| POTICON RFK423 | Otsuka Chemical Co., Ltd. | PPS | POTICON |
