Order Products : sales@su-jiao.com
TRILAC® ABS-FR1
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Polymer Technology and Services, LLC |
| Trademark: | TRILAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kMTZUU_TRILAC-ABS-FR1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TRILAC®ABS-FR1 is an acrylonitrile butadiene styrene (ABS) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.80 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2170 | MPa | ASTM D638 |
| Tensile Strength (Yield, 3.17 mm) | 36.5 | MPa | ASTM D638 |
| Flexural Modulus (3.17 mm) | 2240 | MPa | ASTM D790 |
| Flexural Strength (3.17 mm) | 64.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.17 mm) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, unannealed, 3.17mm) | 76.7 | °C | ASTM D648 |
| RTI Elec | 60.0 | °C | UL 746 |
| RTI Imp | 60.0 | °C | UL 746 |
| RTI | 60.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 5VA | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 - 93.3 | °C | |
| Drying Time | 2.0 - 24 | hr | |
| Rear Temperature | 177 | °C | |
| Middle Temperature | 204 | °C | |
| Front Temperature | 216 | °C | |
| Processing (Melt) Temp | 232 - 249 | °C | |
| Mold Temperature | 54.4 - 71.1 | °C | |
| Injection Pressure | 55.2 - 82.7 | MPa | |
| Back Pressure | 0.689 | MPa | |
| Screw Speed | 50 - 60 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polyethylene LDPE 1070 MN 18 C | TOTAL Refining & Chemicals | LDPE | TOTAL Polyethylene |
| Network Polymers SAN 270 | Network Polymers, Inc. | SAN | Network Polymers SAN |
| ADEKA CM series | Adeka Corporation | PUR-Ether | ADEKA |
| ALCOM® PA66 910/1.1 CF30 PTFE15 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Polene EVA MV1055 | TPI Polene Public Company Limited | EVA | Polene EVA |
