Order Products : sales@su-jiao.com
Badaflex® TPE-S 60A 1344 LD GR
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kMEwNM_Badaflex-TPE-S-60A-1344-LD-GR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer as a low density and low odour injection moulding grade for automotive interieur applications Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 60 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 8.50 | MPa | DIN 53504 |
| Tensile Elongation | DIN 53504 | ||
| Across Flow : Break | 860 | % | |
| Flow : Break | 750 | % | |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 24 | % | |
| 70°C, 24 hr | 42 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | DIN 53515 | ||
| -- 1 | 18.0 | kN/m | |
| Transverse Direction | 20.0 | kN/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Note Message | |
|---|---|
| 1 . | Parallel Direction |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| FRAGOM LC/125 RR | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| GETILAN GPE/400 XT2 | Crosspolimeri S.p.A. | XLPE | GETILAN |
| EL-Pro™ P852J | SCG Chemicals Co., Ltd. | PP Copolymer | EL-Pro™ |
| Sumikon® FM-XTK305 | SBHPP | PPS | Sumikon® |
| OTECH PVC OW135 - Automotive Insulation | OTECH Corporation | PVC, Unspecified | OTECH PVC |
