Order Products : sales@su-jiao.com
EMPBT® GFR 30
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMPBT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kME8e0_EMPBT-GFR-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBT %30 glass fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.45 to 1.55 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 4.0 to 14 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.30 to 0.50 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 70 to 80 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5000 to 7500 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 40.0 to 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 4.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 150 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 160 | °C | ISO 306/B |
| Melting Temperature (DSC) | 230 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SilTRUST® TSE3661 | Momentive Performance Materials Inc. | Silicone | SilTRUST® |
| TEREZ PA/PP 7250/1 | TER HELL PLASTIC GMBH | Nylon 6+PP | TEREZ PA/PP |
| 3M™ Dyneon™ Fluoroplastic THV 505ESDZ | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroplastic |
| DELPET™ 80NE | Asahi Kasei Chemicals Corporation | Acrylic (PMMA) | DELPET™ |
| Elastollan® 1185 A | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
