Order Products : sales@su-jiao.com
Generic PP Impact Copolymer - Glass Fiber
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kLkOLN_Generic-PP-Impact-Copolymer---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Impact Copolymer - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 to 1.09 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 to 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.30 to 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break, 23°C) | 3.0 to 7.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2180 to 4830 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 72 to 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 132 to 152 | °C | |
| 1.8 MPa, Unannealed | 120 to 122 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2103 TFE 15 | RTP Company | PEI | RTP |
| EZPrene 9090A | ENPLAST Americas, a Ravago Group Company | TPV | EZPrene |
| Elastron® G G400.A50.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Hanwha Total PP GH41 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| Techsil® EP25485 | Techsil Limited | Epoxy | Techsil® |
