Order Products : sales@su-jiao.com
Delrin® Stock Shapes 150
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | Ensinger Inc. |
| Trademark: | Delrin® Stock Shapes |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kLAkg2_Delrin-Stock-Shapes-150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DELRIN® is a crystalline plastic which offers an excellent balance of properties that bridge the gap between metals and plastics. DELRIN® possesses high tensile strength, creep resistance and toughness. It also exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals. These properties along with its fatigue endurance make DELRIN® ideal for many industrial applications. Ensinger's Delrin® 150 stock shapes are a homopolymer acetal manufactured using DuPont Delrin 150 Resin. It is a crystalline plastic which offers an excellent balance of properties to bridge the gap between metals and plastics. It possesses high tensile and flexural properties, along with creep resistance and toughness, while exhibiting low moisture absorption, and fatigue endurance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.25 | % | |
| Saturation | 0.90 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 94 | ||
| R-Scale | 120 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3100 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 75.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 25 | % | ASTM D638 |
| Flexural Modulus | 2900 | MPa | ASTM D790 |
| Flexural Strength | 110 | MPa | ASTM D790 |
| Compressive Strength | 35.9 | MPa | ASTM D695 |
| Coefficient of Friction 1(vs. Itself - Dynamic) | 0.20 | ||
| Wear Factor | 110 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 169 | °C | |
| 1.8 MPa, Unannealed | 125 | °C | |
| Melting Temperature | 175 | °C | ASTM D2133 |
| CLTE - Flow | 1.2E-4 | cm/cm/°C | ASTM D696 |
| Maximum Service Temperature | |||
| Continuous | 85 | °C | UL 746B |
| Intermittent | 149 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Limiting Pressure Velocity | 1460 | psi·fpm |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant 2(60 Hz) | 3.70 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 5.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 40 psi, 50 fpm |
| 2 . | 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Calprene® 419 | Dynasol Elastomers | SBS | Calprene® |
| HIFOR Xtreme® SC74870 | Westlake Chemical Corporation | LLDPE | HIFOR Xtreme® |
| THERMOLAST® K TF7ADN (Series: FC/AD1/PS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| SABIC® BR 5510 | Saudi Basic Industries Corporation (SABIC) | PBR, High Cis | SABIC® BR |
| CYCOLOY™ CY6110 resin | SABIC Innovative Plastics Europe | PC+ABS | CYCOLOY™ |
