Order Products : sales@su-jiao.com

NuSil CV1-2640

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kHiYXs_NuSil-CV1-2640.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 25 ohm-cm, Pumpable

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 25 ohm-cm, Pumpable

General Information
Features	Electrically Conductive Low to No Outgassing
Uses	Aerospace Applications Electrical/Electronic Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate
Part A	300	g/min
Part B	150	g/min

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.07	g/cm³
Curing Time (65°C)	2.0	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Tensile Strength	3.62	MPa
Tensile Elongation at Break	230	%

Resin Grade	Manufacturer	Category	Trademark
Inverko HDRG9901	Inverko Compounding B.V.	HDPE	Inverko
MAXAMID™ EPDM66G33-NC010	Pier One Polymers, Inc.	Nylon 66	MAXAMID™
MAXAMID™ PA66AVL-1000-BK	Pier One Polymers, Inc.	Nylon 66	MAXAMID™
ESTOPLAST XU 6430IY01	Ester Industries Ltd.	Nylon 66	ESTOPLAST XU
Sylvin 8280-70UV White 1549	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin