Order Products : sales@su-jiao.com

SABIC® EPDM 245

Category:	EPDM , Ethylene Propylene Diene Terpolymer
Manufacturer:	Saudi Basic Industries Corporation (SABIC)
Trademark:	SABIC® EPDM
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kGZGGD_SABICEPDM245.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SABIC® EPDM 245 is a low Mooney viscosity polymer with low ethylene and medium ENB grade produced by solution polymerization using metallocene catalyst. It has a broad molecular weight distribution for excellent compounding and processability even without addition of a plasticizer. It can be used as a polymeric plasticizer in blends with other high viscosity polymers. Characteristics. SABIC® EPDM 245 is designed for: Excellent processability resulting in shorter mixing and molding times Good low temperature properties Good low temperature flexibility and compression set Fast cure rate and high cure state Typical applications. Brake parts Precision seals Gaskets Molded foam sheets Electrical connectors Hose mandrels Other molded articles This product is not intended for and must not be used in any pharmaceutical/medical applications.

Message

SABIC® EPDM 245 is a low Mooney viscosity polymer with low ethylene and medium ENB grade produced by solution polymerization using metallocene catalyst. It has a broad molecular weight distribution for excellent compounding and processability even without addition of a plasticizer. It can be used as a polymeric plasticizer in blends with other high viscosity polymers.

Characteristics.
SABIC® EPDM 245 is designed for:

Excellent processability resulting in shorter mixing and molding times

Good low temperature properties

Good low temperature flexibility and compression set

Fast cure rate and high cure state

Typical applications.

Brake parts

Precision seals

Gaskets

Molded foam sheets

Electrical connectors

Hose mandrels

Other molded articles

This product is not intended for and must not be used in any pharmaceutical/medical applications.

General Information
Features	Excellent Processability Good Compression Set Flexibility at low temperatures Low viscosity Fast curing Wide molecular weight distribution Low temperature resistance
Uses	Washer Composite Mixing Connector Seals Sheet
Processing Method	Composite

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 125°C)	26	MU	ASTM D1646
Ethylene Content	50.0	wt%	ASTM D3900
Ethylidene Norbornene (ENB) Content	4.2	wt%	ASTM D6047

Resin Grade	Manufacturer	Category	Trademark
TEKNILID HS165	Tekni-Films, a div of Tekni-Plex	Film, Al Foil/Polyester	TEKNILID
Moplen EP318R	PolyMirae	PP Copolymer	Moplen
NILENE® E3	Taro Plast S.p.A.	PP Copolymer	NILENE®
Fainplast PVC ART 30	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
Sylvin 916VO Grey 9153	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin