Order Products : sales@su-jiao.com
SABIC® PP 5707N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kFZ20N_SABIC-PP-5707N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Provisional - PP Homopolymer STIFFPACT for Injection Molding PP 5707N is a reactor PP homopolymer grade with antistatic and nucleated agents. It is suitable for producing injection molded applications and gives consistent processability, good flow properties for excellent part filling, high stiffness and good CLARITY at the products. This grade allows for short cycle times. Typical Applications PP 5707N can be used for houseware, thin wall packaging, caps & closures and garden furniture items with good dimensional stability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 24 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.2 to 2.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1800 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 33 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 to 225 | °C | |
| Middle Temperature | 200 to 225 | °C | |
| Front Temperature | 200 to 225 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Rate B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 123-50W175 | ExxonMobil Chemical | TPV | Santoprene™ |
| NuSil CV-2960 | NuSil Technology | Silicone | NuSil |
| DuraGrip® DGR 6230CL | Advanced Polymer Alloys | TPE | DuraGrip® |
| Geon™ Vinyl Flexible XV3775 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Electrafil® PC 04009 FR BK | Techmer Engineered Solutions | PC | Electrafil® |
